|
Post by vladfs on Nov 11, 2015 16:03:40 GMT
Thanks, Фред.
|
|
|
Post by vladfs on Nov 10, 2015 19:33:27 GMT
Hi Matti! What's the size of angle of mast's slope to wards desk?
|
|
|
Post by vladfs on Oct 22, 2015 15:13:07 GMT
Fred, thank you for so detailed information about "Vasa" boats. Vlad.
|
|
|
Post by vladfs on Oct 19, 2015 10:46:22 GMT
|
|
|
Post by vladfs on Sept 28, 2015 15:44:28 GMT
|
|
|
Post by vladfs on Aug 27, 2015 17:35:37 GMT
Thanks for the kind words, Peter and Fred! Vlads.
|
|
|
Post by vladfs on Aug 22, 2015 12:02:10 GMT
|
|
|
Post by vladfs on Aug 12, 2015 14:43:12 GMT
My zoo
|
|
|
Post by vladfs on Jul 20, 2015 11:30:10 GMT
Continuation of making of gun port lids. The gun port lid consists of 12 details, plus 6 miniature nails. Nails are made by Alexy Domaov`s method. vk.com/video-29368888_170297899
|
|
|
Post by vladfs on Jul 12, 2015 17:44:17 GMT
Hi, marktiendes! Nicely, but with some mistakes. Channels were reeved on wales but not above wales. Vlad
|
|
|
Post by vladfs on Jul 10, 2015 17:02:35 GMT
Making of gun port lid hinges. Device for making hinges. Plank and a piece of 0,5mm drill: A copper piece puts in between drill and a plank. Making one rotation: Hinges of slot 0,5mm Device for drilling of 0,4mm slot: Drilling: Hinges:
|
|
|
Post by vladfs on Jun 28, 2015 17:41:27 GMT
|
|
|
Post by vladfs on Jun 22, 2015 17:43:32 GMT
Hi, Jan! Hand mould must be dry 2 - 3 days in very warms plage before using. That was condition for mould not to be flown up. I used my mould 4-5 cycles.
|
|
|
Post by vladfs on Jun 21, 2015 19:23:46 GMT
Did the gypsum hold its form enough to do all the guns, or did you make several moulds? Jan
Hi,Jan! Some hand moulds were made, of course. 2 or 3 pieces for every gun size.
|
|
|
Post by vladfs on Jun 21, 2015 11:45:38 GMT
|
|