mikeb
New Member
Posts: 2
|
Post by mikeb on Jul 17, 2020 17:43:54 GMT
Hi I am new here and would like to see what people have to say about the inernal detail to the bulwarks. I am tryimg to get my Corel 1/75 model as near to accurate as possible without being over zealous. I have the prrofile first planking and lining fairly well sorted a little unsure on the vertical members and the colour which I was intending to use red ochre. The outer hull red looks very pink/ red ?
Any help would be much appreciated
Thanks
Mike
|
|
|
Post by mi5 on Jul 18, 2020 6:25:02 GMT
Hi Mike and welcome to the forum. To the best of my knowledge the inner bulwark weren't painted. I would like to see some pictures of your build . Martyn
|
|
mikeb
New Member
Posts: 2
|
Post by mikeb on Jul 18, 2020 13:02:03 GMT
Thanks Just in the early stages - the corel instructions are not great so having to look ahead then track back so nothing is missed that can't be fitted later. The Fred Hocker book is coming in useful and this forum has helped already. Corel have what they call a patented method of installing backs and sides for the dummy canon ports. I think to sratch a rail and false deck would have been better ! Anyway heres a couple of progress shots
|
|
|
Post by mi5 on Jul 19, 2020 12:11:14 GMT
Looking good Mike. I built the Corel Vasa quite a while ago and found it quite challenging. Martyn
|
|